Sewing mamas!Calling all AmityMama's who like to sew! Do you make quilts, clothes, diapers, bags? Do you love to run your fingers through fiber? Can't get enough just sewing, but want to talk about it too? Come on in!
OK, so I'm new to using a serger, I have an older babylock (model EA-605, I got lucky and it still has the manual) and I am teaching myself how to use it. The question is, what is the differance between interlock and overedging and double lock??? what are these diferent stitches used for? And will a seam hold under stress if I use interock on 2 peices of fabric and open it up? I don't know if I'm describing that right, so if someone can also help me figure out how to post pics, I'll show you what I'm talking about! Thanks in advance!! -Crystal
but one tip that i have for those new to serging is to thread each thread with a different color and then test it out on fabric. so maybe follow the directions to do each and then you might be better able to figure out the difference between stitches.
__________________
kristin
mom to erin (4) and leah (9/29/05)
Actually, it was set-up for interlock when I got it and I haven't gotten brave enough to change everything...because it's older it really involves alot of part-moving...
I don't know if I'm describing that right, so if someone can also help me figure out how to post pics, I'll show you what I'm talking about! Thanks in advance!! -Crystal
I do not know what an interlock stitch is, maybe it's set up for interlock knits? It looks like it's making flatlock stitches. I had a similar problem with my stitches on my older babylock, too. I ususally just did a three thread and then went over it with the sewing machine where the 4th thread would be. I did read here that if you use a good sewing machine thread on the outer needle that this helps, and I tried it on my Babylock and it worked well. Also, I talked to my repair guy and he told me he usually adjusts the needle tensions one number higher than the looper tensions, but that they didn't all have to be the same. I would ask the former user, or your repair guy. He also said to use only Maxi_lock or equivalent quality thread, because the consistent thckness won't throw off your tensions.
Thanks, although I'm sure I know exactly what you are talking about....I'm kinda' sewing by the seat of my pants! The previous owner didn't really know how to use it either and the manual that comes w/ it is a little vague at best!
BTW, Is flatlock a sturdy stitch?
Well, your pictures look like a flat lock stitch from what I can tell. If you stitch your seem, two pieces of fabric you can open it up into one flat piece after you stitch it down, hope that makes sense. I think the only way your going to get used to your machine is to experiment. You should go through all the different techniques your manual has and try out on scrap pieces until you become comfortable, it may take a while. Don't be afraid of your machine, the only way you'll learn is by trail and error. Also, check out a sewing shop in your area for serger classes they will help tons. Another thing you can do is go to the serger yahoo group, there is a zillion people there and I'll bet someone might have that same model and can help you with specific questions.
A flat lock stitch is okay, if you don't mind the threads showing. That is why I usually went over it with a sewing machine for extra sturdiness. Try new thread in the outside needle and play with the tensions, too, that may help.
Nice, exactly what I was wondering, thanks ladies! As a matter of fact, I really like the way it shows the thread, adds some more color! I just wasn't sure if I was supposed to be doing it like that, like maybe the seam wouldn't hold or something.
Linear Mode
