Another tension question UGH! [Archive] - AmityMama.com

View Full Version : Another tension question UGH!


Danaia
05-20-2005, 03:02 PM
My needle tension is off, but I can't fix it. No matter what I do, it always looks like this. What do I do? Is my serger broken???

ETA: I just cleaned, oiled and rethreaded my machine. I was hoping that would fix it, but no such luck :eyes:

~Desiree
05-20-2005, 03:09 PM
Have you tried a different fabric? Maybe its only that fabric?

Danaia
05-20-2005, 03:14 PM
Yep...still doing it :(

mommy2maya
05-20-2005, 03:21 PM
Try adjusting the loopers as well

Danaia
05-20-2005, 03:22 PM
Mary - Did that too. I've tried everything. My timing's probably off, huh?

Maiden Comfort
05-20-2005, 03:50 PM
Put all your tensions at like 2, and start moving up from there. Tighten them a little at a time until it looks like that again, and then loosen them a bit.

Pixie's~Mama
05-20-2005, 03:57 PM
Maybe your tension disks are dirty. take a piece of thick thread and dip it in alchohol and run it trhough the tension discs to clean them. Other than that, I once had a tension disk "go bad" and it had to be replaced. Maybe that's it... Check your tension disks to make sure they're still working.

Danaia
05-20-2005, 04:05 PM
Thanks everyone. I've cleaned the disks, the disk itself is ok. I just don't know what else to do. I guess I'm going to have to fork out the $$$ for it to be repaired. UGH! It's only 4 months old for crying out loud :mad:

oceanna
05-20-2005, 04:13 PM
This is going to sound crazy, and I have no idea why it worked ...
I had a serger that did that same thing ... no matter what I tried, the needle tension was loose. The only way to "fix" it was to take the spool of needle thread down on my sewing table, next to the serger. I used a cup to hold it. When I serged w/ the thread in the cup--no problems. LOL!

Danaia
05-20-2005, 04:35 PM
Ok, so I cleaned my tension disks again...and now NONE of them are working :wah: I'm seriously going to cry.

Pixie's~Mama
05-20-2005, 04:39 PM
Ok, so I cleaned my tension disks again...and now NONE of them are working :wah: I'm seriously going to cry.


Stupid question maybe, but is your presser foot up?

Danaia
05-20-2005, 04:55 PM
Stupid question maybe, but is your presser foot up?

LOL! Not a stupid question. I do actually do those things occasionally. But guess what...you were right to begin with...it was my tension disk!!! I took the darn thing apart and fixed it myself! I feel like Rosie the Riveter LOL! Thanks Meagan :hug:

ginnings
05-20-2005, 04:56 PM
LOL! Not a stupid question. I do actually do those things occasionally. But guess what...you were right to begin with...it was my tension disk!!! I took the darn thing apart and fixed it myself! I feel like Rosie the Riveter LOL! Thanks Meagan :hug:

Glad you figured out what was wrong with it and fixed it!!

Danaia
05-20-2005, 04:57 PM
Glad you figured out what was wrong with it and fixed it!!

Me too :lol:

kkdmommy
05-20-2005, 04:59 PM
LOL! Not a stupid question. I do actually do those things occasionally. But guess what...you were right to begin with...it was my tension disk!!! I took the darn thing apart and fixed it myself! I feel like Rosie the Riveter LOL! Thanks Meagan :hug:

Well hey, that's wonderful news! Just saw your post and was thinking the worst but you fixed it :D

Pixie's~Mama
05-20-2005, 05:00 PM
LOL! Not a stupid question. I do actually do those things occasionally. But guess what...you were right to begin with...it was my tension disk!!! I took the darn thing apart and fixed it myself! I feel like Rosie the Riveter LOL! Thanks Meagan :hug:

WOOHOOOO!!!! WTG mama! :monkeydan :happy:

xheathers
05-20-2005, 05:06 PM
LOL! Not a stupid question. I do actually do those things occasionally. But guess what...you were right to begin with...it was my tension disk!!! I took the darn thing apart and fixed it myself! I feel like Rosie the Riveter LOL! Thanks Meagan :hug:
You go! Congrats on fixing it Danaia!!!

Danaia
05-20-2005, 05:06 PM
Thanks you guys :) I'm always thinking the worst and I was trying to figure out just how much I could get for my kidney ;)